Brass body
Round brass or stainless steel AISI 430 arm
Conforms to BS1212/1 standard
Max working pressure recommended up to 14 bar
Temperature Max 80°
SIZES: 1/2” - 3/4” - 1”
Float valve BS1212/1
The 101 series, fully compatible with the BS1212/1 standard, is characterized by the body and the tailpiece joined by a tightening nut so as to facilitate cleaning and replacement of the internal gaskets.
Thanks to the variety of its components, the valve can be composed according to your technical needs, in fact the following are available: 3 different types of tails, 5 types of rods, 4 different types of seat; locknuts and piston both in plastic and brass.
All these variables can be combined with each other thus giving the possibility to find the best solution to your needs.
ROUND brass or stainless steel ARM
DIE-CAST brass BODY for ½”
PRESSED brass BODY for ¾” and 1”
Plastic piston for ½ “; Brass for ¾" and 1”
| OVERALL MEASURES | Box | RECOMMENDED BALLS | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Ø DN | C | B | Ø T | Ø S | L | Ø A | HxW | PLASTIC | COPPER | |
| ½ | 50 | 60 | 3,2 | 13 | 250 | 5/16W | - | 4”1/2 | 4”1/2 | |
| ¾ | 50 | 87 | 6,3 | 21 | 350 | 5/16W | - | 6" | 6" | |
| 1 | 50 | 102 | 9,5 | 24 | 370 | 5/16W | - | 8" | 8" | |
Lenght and others Ø in mm
PLSTIC LP SEAT
ROUND brass or stainless steel ARM
DIE-CAST brass BODY for ½”
PRESSED brass BODY for ¾” e 1”
Plastic piston for ½ “; Brass for ¾" e 1”
| OVERALL MEASURES | Box | RECOMMENDED BALLS | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Ø DN | C | B | Ø T | Ø S | L | Ø A | HxW | PLASTIC | COPPER | |
| ½ | 50 | 63 | 9,5 | 13 | 250 | 5/16W | - | 4”1/2 | 4”1/2 | |
| ¾ | 50 | 87 | 9,5 | 21 | 350 | 5/16W | - | 6" | 6" | |
| 1 | 50 | 102 | 15,7 | 24 | 370 | 7/16W | - | 8" | 8" | |
Lenght and others Ø in mm
Modular valve
Choose from the available variants:
TAIL:
- 2" - 50mm
- 2" 1/2 - 63mm
- 3" - 75mm
BACKNUTS:
- Plastic
- Brass
Ø SEAT:
- Plastic HP 1/8 - 3,2mm
- Plastic HP 1/4 - 6mm
- Brass HP 1/8 - 3,2mm
PISTON:
- Plastic
- Brass
LENGHT ARM:
- Brass 6" - 150mm
- Brass 8" - 200mm
- Brass 10" - 250mm
- Stainless Steel 10" - 250mm
- Brass 13" - 325mm
The fields of application of float valves
Each float valve has different characteristics to adapt and provide a specific service to each application sector.
The industrial sector has floats suitable for regulating the flow of water or other liquids inside civil and industrial tanks and basins, even of considerable size.
In agriculture ST products are used inside tanks for irrigation or for storage of fertilizers and other liquids in tanks. The valves used in farms for the operation of automatic drinkers for animals belong to the same sector.
The plumbing sector includes all types of float valves for toilet cisterns.
Balls and accessories are coherently matched to each tap to guarantee the best and correct functioning.
